EN10217

PandaPipe is able to provide customers with high quality and excellent performance of EN10217-1 carbon steel pipes. Can provide ERW, SSAW, LSAW and other production processes of non-alloy carbon steel welded round pipe.

en 10217

EN 10217

EN10217-1 is a standard issued by the European Standardization Committee, which specifies a series of requirements for the raw materials, size specifications, chemical composition, mechanical properties of welded steel pipes. And EN10217-1 quality test and quality control requirements. To ensure the highest quality and safety standards of the steel pipe products produced.

EN10217 Specification

The size of the EN10217-1 carbon steel pipe supplied by Pandapipe is strictly controlled, and the production is strictly in accordance with international standards to ensure that the pipe manufactured meets the specified requirements. These include outer diameter, wall thickness, length and weight per unit length. And we can provide you with personalized steel pipe, there are a variety of wall thickness and size pipe to choose from, to ensure that you can meet the special needs of your project.

StandardEN10217
ProcedureERW, SSAW, LSAW
Dimensions10.2mm  2540mm
1/8″  100″
DN8  DN2400
Thickness1.4mm  40mm
SCH 10 SCH XXS
Unit Length1.5  18 mtrs
Steel GradeEN 10217 P195TR1EN 10217 P265TR2EN10217-7 X6CrNiMoTi17-12-2
EN 10217 P195TR2EN10217-7 X2CrNi18-9EN10217-7 X2CrNiMo18-15-4
EN 10217 P235TR1EN10217-7 X5CrNi18-10EN10217-7 X2CrNiMoN22-5-3
EN 10217 P235TR2EN10217-7 X2CrNiMo17-12-2
EN 10217 P265TR1EN10217-7 X6CrNiTi18-10
Surface CoatingVarnishing, Black, Oiling, Hot Dip Galvanizing
End TypeSquare cut, Bevelled, Threaded, Grooved
Joint MethodFitting, Flange, Coupling, Clamp, Pipe Shoulder, Welding
Pipe MachiningWelding, Bending, Hole Drilling, Punching, Swaging, Tapering, Flaring, Expanding

Steel Grades in EN10217

PandaPipe is able to provide customers with high quality and excellent performance of EN10217-1 carbon steel pipes. Can provide ERW, SSAW, LSAW and other production processes of non-alloy carbon steel welded round pipe. On the other hand, there are Square cut, Bevelled, Threaded, Grooved and other types for you to choose from. PandaPipe ensures that the EN10217-1 carbon steel tubes manufactured strictly comply with the TR1 and TR2 quality technical delivery conditions specified in BS EN10217-1:2019.

EN10217 P195TR1

EN10217 P195TR1

The minimum yield strength of EN10217 P195TR1 is 195MPa. It is widely used in oil, natural gas, chemical industry and other fields.

EN10217 P195TR2

EN10217 P195TR2

EN10217 P235TR2 is similar to EN10217 P195TR1 in mechanical properties and applications.

EN10217 P235TR1

EN10217 P235TR1

The minimum yield strength of EN10217 P235TR1 is 235MPa. It is widely used in automobile manufacturing, ship construction, machinery manufacturing and other industrial fields.

EN10217 P235TR2

EN10217 P235TR2

EN10217 P235TR2 is similar to EN10217 P235TR1 in mechanical properties and applications.

EN10217 P265TR1

EN10217 P265TR1

The minimum yield strength of EN10217 P265TR1 is 265MPa. It is widely used in boiler pipes, chemical equipment, pressure vessels and structural steel pipes and other industrial fields.
EN10217 P265TR2

EN10217 P265TR2

EN10217 P265TR2 is similar to EN10217 P265TR1 in mechanical properties and applications.

EN10217 Dimension Table

Pandapipe manufactures EN10217-1 carbon steel tubes in a variety of sizes. Whether you need large diameter pipes for large construction projects or small diameter pipes for residential applications, we can provide the right size for your project. The following is the detailed size table of EN10217-1, hoping to provide you with some reference help.
Outside diameter Wall thickness T
1.4 1.6 1.8 2 2.3 2.6 2.9 3.2 3.6 4 4.5 5 5.6 6.3 7.1 8 8.8 10 11
10.2
12
12.7
13.5
14
16
17.2
18
19
20
21.3
22
25
25.4
26.9
30
31.8
32
33.7
35
38
40
42.4
44.5
48.3
51
54
57
60.3
63.5
70
73
76.1
82.5
88.9
101.6
108
114.3
127
133
139.7
141.3
152.4
159
168.3
Outside diameter Wall thickness T
2 2.3 2.6 2.9 3.2 3.6 4 4.5 5 5.6 6.3 7.1 8 8.8 10 11 12.5 14.2 16 17.5 20 22.2 25 28 30 32 36 40
177.8
193.7
219.1
244.5
273
323.9
355.6
406.4
457
508
559
610
660
711
762
813
864
914
1016
1067
1118
1168
1219
1321
1422
1524
1626
1727
1829
1930
2032
2134
2235
2337
2438
2540

Chemical Requirements of EN10217

Pandapipe offers to manufacture EN10217-1 steel pipes in strict compliance with the chemical composition standards of EN10217 steel pipes, ensuring that they meet the highest quality and performance standards. The chemical composition of EN10217-1 includes elements such as carbon, manganese, phosphorus, sulfur and silicon. High carbon content to enhance strength. Thus, high-quality steel pipe products with high corrosion resistance and high durability are manufactured.
Chemical Composition (Cast Analysis) a, In % By Mass
Steel Grade C max. Si max. Mn max. P max. S max. Cr b Max. Mo b max. Ni b max. Al tot min. Cu b c max. Nb b max. Ti b max. V b max. Cr+Cu+Mo+Ni b max.
Steel Name Steel Number
P195TR1 1.0107 13 35 70 25 20 30 8 30 30 10 4 2 70
P195TR2 1.0108 13 35 70 25 20 30 8 30 0,02 d 30 10 4 2 70
P235TR1 1.0254 16 35 120 25 20 30 8 30 30 10 4 2 70
p235TR2 1.0255 16 35 120 25 20 30 8 30 0,02 d 30 10 4 2 70
P265TR1 1.0258 20 40 140 25 20 30 8 30 30 10 4 2 70
P265TR2 1.0259 20 40 140 25 20 30 8 30 0,02 d 30 10 4 2 70
b    Elements not included in this Table shall not be intentionally added to the steel without the agreement of the purchaser, except for elements which may be added for finishing the cast. All appropriate measures shall be taken to prevent the addition of undesirable elements from scrap or other materials used in the steel making process.
b    The content of these elements need not be reported unless intentionally added to the cast.
c    Option 3: In order to facilitate subsequent forming operation, an agreed maximum copper content lower than indicated and an agreed specified maximum tin content shall apply.
d    This requirement is not applicable provided the steel contains a sufficient amount of other nitrogen binding elements, which shall be reported.

Mechanical Requirements of EN10217

Our EN10217-1 carbon steel pipes are subjected to multiple tests designed to ensure that the mechanical properties of the steel pipes produced meet and exceed the standards for strength, durability and other mechanical properties. These requirements include characteristics such as tensile strength, yield strength, elongation and impact resistance.
Mechanical Properties a
Steel Grades Tensile Properties Impact Properties
Steel Name Steel Number Upper Yield Strength Tensile Strength Elongation Minimum Average
Reh b min for A min Absorbed Energy KV   J
T mm Rm % b c at a temperature of ℃ c
T ≤16 16<T≤40 l t
MPa * MPa * l t 0 -10 0
P195TR1 e 1.0107 195 185 320-440 27 25
P195TR2 1.0108 195 185 320-440 27 25 40 28 d 27
P235TR1 e 1.0254 235 225 360-500 25 23
P235TR2 1.0255 235 225 360-500 25 23 40 28 d 27
P265TR1 e 1.0258 265 255 410-570 21 19
P265TR2 1.0259 265 255 410-570 21 19 40 28 d 27
a    For wall thickness greater than 40 mm the mechanical properties are subject to agreement.b    See 11.2. c    l = longitudinal; t = transverse. d    Option 5: Additionally,  longitudinal impact strength shall be verified at – 10 °C. e    Tubes made to these material grades are unlikely to support the essential requirements of Directive 97/23/EC unless other criteria are taken into account, see Annex I section 7.5 of this Directive *    1 MPa = 1 N/mm²

EN10217 Production Tolerance

Tolerances on outside dlameter and wall thickness
Outside diameter D Tolerances on
Outside diameter D Wall thickness T
T ≤ 5 5 < T ≤40
D ≤ 219,1 ±1% or ±0,5 whichever is the greater ±10% or ±0,3 whichever is the greater ±8% or ±2whichever is the sma ller
D> 219,1 ±0,75% or ±6 whichever is the smaller
Tolerances on exact length
Length Tolerances on exact length for outside diameter (D)
L < 406,4 ≥406,4
L ≤ 6000 +10, 0 +25 0
6000 <L ≤ 12000 +15, 0 +50 0
L > 12000 +by agreement 0

Application of EN10217-1

Structural support: EN10217-1 has a wide range of applications in bridge structures, building support structures and transmission tower support structures. It can bear strong pressure and loads to ensure the safety and stability of the building.

Pipeline transportation: Often used for oil and natural gas and other water, oil, and other gas transportation. It can provide transportation power for urban water systems and oil and gas extraction.

Environmental engineering: Often used in sewage wastewater and industrial waste pipe systems. Because EN10217-1 has excellent corrosion resistance and sealing properties.

Manufacturing engineering: The high strength and weldability of EN10217-1 make it also widely used in the field of automotive parts and shipbuilding.

Related Products

Our Advantages

  1. Over 25 years of experience in pipeline production and installation.
  2. Comprehensive inspection equipment.
  3. Independent product serial numbers for traceability.
  4. Advanced production equipment – Seamer high-frequency welding machine from the United States.
  5. Complete qualifications – API 5L/API 5CT/FM/UL fire pipe certification, etc.
  6. Wide range of products – independently developed solar torque tubes, highly favored in the European market.
  7. Customers spread across the globe.
  8. Excellent after-sales service and sense of responsibility.

CONTACT US