ASTM A210 Pipe Supplier

ASTM A210 Pipes

ASTM A210/A210M is a standard published by the American Society for Materials and Testing for seamless medium carbon steel boiler and superheater tubes. These tubes are ideal for boiler flues, arch pipes and support pipes, as well as other applications where strength and durability are required.

Pandapipe manufactures steel pipes in strict compliance with ASTM A210 standards and supports tripartite testing to ensure that the pipes you receive are of the best performance and quality.

ASTM A210 Specification

ASTM A210 steel pipe manufactured by Pandapipe has a very comprehensive specification. Follow the highest standards in the production process. Can provide you with steel pipe secondary processing services. For example, surface treatments cover Varnishing, Black, Oiling, Hot Dip Galvanizing and many other types. On the other hand, there are a variety of end types and connection methods to ensure compatibility with your existing systems.

Standard	ASTM A210
Procedure	SMLS
Dimensions	21.3mm – 141.3mm
	1/2″ – 5″
	DN15 – DN400
Thickness	0.9mm – 12.7mm
Thickness	SCH 10 -SCH 160
Unit Length	1.5 – 25 mtrs
Steel Grade	ASTM A210 A1
Steel Grade	ASTM A210 C
Surface Coating	Varnishing, Black, Oiling, Hot Dip Galvanizing
End Type	Square cut, Bevelled, Threaded, Grooved
Joint Method	Fitting, Flange, Coupling, Clamp, Pipe Shoulder, Welding
Pipe Machining	Welding, Bending, Hole Drilling, Punching, Swaging, Tapering, Flaring, Expanding

Steel Grades in ASTM A210

ASTM A210 Grade A1

ASTM A210 Grade A1 steel pipe has a minimum yield strength of 275MPa. ASTM A210 Grade A1 steel pipe has excellent weldability and moderate strength. It is widely used in low temperature boilers and hot water systems below 450°C.

ASTM A210 Grade C

ASTM A210 Grade C steel pipe has a minimum yield strength of 345MPa. ASTM A210 Grade C steel pipe has excellent strength and toughness and is widely used in boiler systems in high pressure and high temperature environments.

ASTM A210 Dimension Table

Here is the size table of ASTM A210/A210M pipe provided by Pandapipe. The table covers the outside diameter, wall thickness and other parameters. Pandapipe can provide you with a very comprehensive range of pipe sizes. At the same time, we provide flexible personalized customization services to ensure that the steel pipe meets the needs of your project.

Outside Diameter：	1⁄2 to 5 in. [12.7 to 127 mm]
Wall Thickness：	0.035 to 0.500 in. [0.9 to 12.7 mm]
Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification.

Chemical Requirements of ASTM A210

Pandapipe manufactures ASTM A210/A210M pipes in strict accordance with the chemical composition requirements of the standard. Carefully control the proportion of chemical elements to ensure the mechanical properties and service life of the pipe. Pipes manufactured by Pandapipe are not allowed to contain any element composition not listed in the standard to ensure their purity and performance.

Chemical Requirements
Element	Composition, %
Element	Grade A- 1	Grade C
CarbonA, max	0.27	0.35
Manganese	0.93 max	0.29– 1.06
Phosphorus, max	0.035	0.035
Sulfur, max	0.035	0.035
Silicon, min	0.1	0.1
A For each reduction of 0.01 % below the speciﬁed carbon maximum, an increase of 0.06 % manganese above the speciﬁed maximum will be permitted up to a maximum of 1.35 %.

Mechanical Requirements of ASTM A210

Pandapipe’s pipes have been tested for key mechanical properties such as tensile strength, yield strength and elongation. These tubes are designed to withstand expansion, flanging, forging, welding and bending without defects. They have undergone tensile testing, flattening testing, flaring testing, hardness testing and hydrostatic or non-destructive electrical testing to ensure their mechanical integrity.

Tensile Requirements
	Grade A- 1	Grade C
Tensile strength, min, ksi [MPa]	60 [415]	70 [485]
Yield strength, min, ksi [MPa]	37 [255]	40 [275]
Elongation in 2 in. or 50 mm, min, %	30	30
For longitudinal strip tests, a deduction shall be made for each 1⁄32-in. [0.8-mm] decrease in wall thickness under 5⁄16in. [8 mm] from the basic minimum elongation of the following percentage points	1.50A	1.50A
When standard round 2-in. or 50-mm gage length or smaller proportionally sized specimen with the gage length equal to 4D (four times the diameter) is used	22	20
A See Table 4 for the computed minimum values.

Application of ASTM 210

Fertilizer production: It is often used in high-temperature fertilizer reactors and high-pressure conveying system pipelines.
Shipbuilding industry: often used in ship boiler flue gas treatment and steam piping system.
Coal-fired and gas-fired power plants: commonly used in steam systems and heat exchange systems.
Petrochemical industry: It is often used in petrochemical low-pressure transportation pipelines and high-temperature transportation pipelines and high-pressure reactor pipelines in petroleum refining.

FAQs

1.Main processes and applications of ASTM A210
The full name of the ASTM A210 standard is “Standard Specification for Medium Carbon Steel Seamless Tubes for Boilers and Superheaters”, so the main process is seamless process, and the main application is pressure vessels such as boilers, superheaters, and heat exchangers.

2.What is the difference between A210 and A106 seamless pipes?
Both standards refer to seamless carbon steel pipes, but the main difference between them lies in their application areas. ASTM A210 is specifically designed for pressure vessels such as boilers and superheaters, while ASTM A106 is primarily for high-temperature and high-pressure transmission pipes.

3.What is the difference between SA-210 and A210?
There is no difference between the two standards in terms of content. A210 is issued by ASTM, and SA-210 is issued by ASME. When the pressure vessel or boiler equipment used is ASME certified, SA-210 issued by ASME must be used.